1.Machine shape and use
1) Machine shape:
The shape of the machine tool and the machine tool are composed of gearbox, headstock, round column, table, bracket, base, electrical box and other components. The gearbox is combined on the headstock. The headstock is placed above the round column and can be moved up and down. The position is above the machine. The workbench is set on the bracket, the bracket is set in the middle of the round column, and the round column is mounted on the base.
2) Use:
The machine has the functions of drilling, reaming, reaming, tapping, boring, milling, etc. It has the advantages of large drilling capacity and can accommodate a large range of parts to be machined. Therefore, it is not only suitable for the parts processing workshop, but also for the use of machine repair workshops.
The headstock and table bracket of the machine tool can be lifted up and down along the column, and can be rotated by ±180° around the column. The table can also be rotated by ±180° in the bracket. It can also rotate ±45° in the transverse plane with the bracket seat.
2.The main technical parameters
name |
parameter |
unit |
|
Maximum drilling diameter
|
40 |
mm |
|
Maximum tapping diameter |
M22 |
mm |
|
Maximum cutter diameter |
330 |
mm |
|
Spindle centerline to column busbar distance |
630 |
mm |
|
Maximum distance from the end face of the spindle to the work surface (motorized) |
1200 |
mm |
|
Maximum distance from the end face of the spindle to the working face of the base |
200 |
mm |
|
Maximum stroke of the spindle |
520 |
mm |
|
Worktable and bracket maximum travel (motorized) |
±45° |
degree |
|
Rotating angle of the table and the bracket in the transverse plane |
MT4 |
|
|
Spindle taper |
12 |
level |
|
pindle shift |
67,100,140,210,300,370 |
r/min |
|
450,550,775,1170,1640,2500 |
|||
Spindle feed stage |
3 |
level |
|
Spindle feed stage |
0.1,0.2,0.3 |
mm/r |
|
Column diameter |
φ140 |
mm |
|
Workbench effective working area (length × width) |
450*390 |
mm2 |
|
Effective working area of the base (length × width) |
410*395 |
mm2 |
|
Workbench and base T-slot |
2-14 |
mm |
|
Two-speed three-phase AC motor YD100L2-6/4 |
power |
1.5/2.2 |
kW |
Voltage |
380 |
V |
|
Rotating speed |
940/1420 |
r/min |
|
Three-phase electric pump DB-6A |
power |
40 |
W |
Voltage |
380 |
V |
|
flow |
6 |
l/min |
|
Electromagnetic clutch |
power |
24 |
W |
Voltage |
24 |
V |
|
Machine tool dimensions (length × width × height) |
920*560*2295 |
mm |
|
Machine weight (gross weight / net weight) |
550/500 |
kg |
3.Same series comparison table
Model |
Z5150A |
Z5050A |
Z5040A |
Z5032A |
Z5032 |
Z4125L |
Maximum drilling diameter |
50mm |
Cast iron 50/steel 40mm |
Cast iron 40/steel 32mm
|
32mm |
31.5mm |
25mm |
Maximum stroke of the spindle |
250mm |
225mm |
190mm |
155mm |
120mm |
250mm |
Spindle centerline to column surface distance |
335mm |
360mm |
330mm |
330mm |
270mm |
230mm |
Maximum distance from the spindle end to the table |
750mm |
590(Maneuver550)mm |
630 |
685mm |
750mm |
710mm |
Maximum distance from the spindle end to the base |
1150mm |
1190mm |
1200mm |
1260mm |
1200mm |
1049mm |
Spindle taper |
MT.5 |
MT.4 |
MT.4 |
MT.4 |
MT.3 |
MT.3 |
Spindle speed range |
32-1450rpm |
54-1450r/min |
67-2500r/min |
125-3030rpm |
65-1380rpm |
160-1880rpm |
Spindle speed series |
12 |
12 |
12 |
12 |
6 |
9 |
Work surface size |
480*560mm |
510*390mm |
450*390mm |
450*390mm |
Φ380mm |
380x330mm |
Base size |
480*550mm |
470*435mm |
410*395mm |
420*370mm |
370*420mm |
320*300mm |
Total height |
2530mm |
2400mm |
2300mm |
2190mm |
1910mm |
1874mm |
electric motor |
4KW |
3KW |
1.5/2.2KW |
1.1/1.5KW |
1100W |
1500W |
Gross weight / net weight |
1350/1250kg |
800/750kg |
550/500kg |
390/350kg |
360/320kg |
270/240kg |
Package dimensions |
121*84*252cm |
110*75*225cm |
105*65*215cm |
103*65*219cm |
90*60*205cm |
90*60*207cm |